Macos For 2011 Macbook Pro

| Posted on by

These key combinations apply only to Mac computers with an Intel processor, not Mac computers with Apple silicon.

Macos Catalina 2011 Macbook Pro

To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.

  • Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
  • Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
  • Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
  • Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
  • D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
  • N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
  • Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
  • T: Start up in target disk mode. Disabled when using a firmware password.
  • Command-V: Start up in verbose mode. Disabled when using a firmware password.
  • Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.

I love my old MacBook Pro. It does everything I want for a portable coding, writing and occasional editing device. I’ve had it since 2011 and it’s still going strong. Apple however doesn’t want to suport it anymore. I’m stuck with macOS High Sierra, without an option to upgrade without shadowy patches. Macbook Pro Retina Late 2012 13 inch. Macbook Air Mid 2012 11 and 13 inch. Mac Mini Late 2012. Mac Pro Mid 2012. IMac Late 2012 21.5 and 27 inch (The Unknown status means that this patcher has not been tested on these Macs do at your own risk) (Macs that are not supported by this Patcher) Macbook Pro Early 2008 15 and 17 inch. Macbook Pro Late. IPad Pro iPadOS 14 iPadOS 15 iPhone 11 iPhone 12 iPhone 12 Pro iPhone 13 iPhone SE 2020 iPhone XR iPod touch Mac mini Mac Pro MacBook Air MacBook Pro 13' MacBook Pro 16' macOS Big Sur macOS Monterey watchOS 7 watchOS 8.

If a key combination doesn't work

I understand that you have a MacBook Pro (Late 2011) that you want to upgrade the macOS on. Based on the following support articles, the farthest you can upgrade is to macOS High Sierra. MacOS High Sierra - Technical Specifications​ How to upgrade to macOS Mojave​.

If a key combination doesn't work at startup, one of these solutions might help:

  • Press and hold all keys in the combination together, not one at a time.
  • Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
  • Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
  • If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
  • If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.

Remember that some key combinations are disabled when your Mac is using a firmware password.

Learn more

  • Keyboard shortcuts that you can use after your Mac has started up.

This article outlines your real world options to correct a faulty GPU graphics card on a MacBook Pro 2011. The AMD Graphics card for most MacBook Pro's manufactured in 2011 are known to have issues after 5-7 years of use. First, let’s understand the expected behavior of a failingtofailed MacBook Pro 2011 AMD 6750 or 6770GPU graphics card.

*Your MacBook Pro begins to run hotter,fans spinningat higher speeds, the CPU begins to spike randomly in any application you have opened according to activity monitor.

*Your first kernelpanic happens. Your MacBook Pro 2011 reboots itself and displays a crash report at the next login. Below is an example repot line:

*You begin using your MacBook Pro 2011 again only to experience another kernel panic and several more thereafter. At this point, you begin to notice distorted video on startup includingparallellines across the screen. In some cases, your MacBook Pro 2011 will no longer boot past the Apple logo.

You just confirmed your MacBook Pro 2011 is suffering from the widely known GPU issue.Apple acknowledge the issue many years ago and offered free replacement program, however many users believed Apple was just “refreshing the MacBook Pro 2011 logic board, and the issue would resurface again 5-7 years later”. Apple ceased the replacement program beginning in 2017. See Apple’s official statement below.

The following models are no longer eligible for this program: MacBook Pro (15-inch, Early 2011), MacBook Pro (15-inch, Late 2011), MacBook Pro (17-inch, Early 2011) and MacBook Pro (17-inch, Late 2011).

First – Force Attempt to Disable the Faulty AMD GPU

This method will write a value into NVRAM to not use the faulty AMD GPU and only use , however this method will not power off the GPU. This means, the GPU will still run with your MacBook Pro on and overheat, forcing your computer to shutdown. In addition, this method is known to cause confusion between your MacBook GPU units while working in the OS and will still cause kernel panics.

This method is NOT recommended as a permanent fix for your MacBook Pro 2011.

This method will help you gain access to your MacBook Pro 2011 to pull off files and perform Time Machine Backups before you won’t be able to post boot. In our experience, this method gave us around 3 hours of time to operate normally in our OS before the MacBook stopped booting altogether.

  1. Reset your MacBook Pro SMC and NVRAM/PRAM.
  1. Shutdown your MacBook Pro. Boot into Single User Mode by holding down Command + S and power on.
  1. Once you single mode has loaded, hit enter a few times to get to localhost:/ root# prompt.
  1. Type the following commands in order below. The first command disables the faulty AMD GPU from loading at start. The second command output boot logs as the MacBook Pro boots up.

Anytime you want to revert the above commands, reset your Mac NVRAM/PRAM outlined above.

As your MacBook Pro reboots, you will see verbose boot logs appearing. You should no longer see distorted video as well. Your MacBook Pro should post a boot and allow you to login.

* At this point Immediately begin to backup your files. *

You can use SMC Fan control to pump up your fan speed to maximum power to help keep the MacBook cool. You’ll notice the GPU Intel HD Graphics 3000 512MB only appear in about this Mac after you made the NVRAM change.

Once you have successfully backed up any files you need, we highly recommend to shutdown your MacBook Pro and no longer use it at this point. The MacBook Pro will eventually stop posting a boot once the GPU chip decides to crap out completely.

Second – Get The Faulty GPU Replaced

If you truly want to save your vintage MacBook Pro 2011 (or in our case the fastest MacBook Pro 17” ever) you need to replace the GPU on your logic board with a 2nd generation AMD chip that was manufactured after 2017. These chips do not go bad. There’s guides online that show you how to do this and you can pick up the newer GPU for around $35. If you don’t want the hassle of disassembling your MacBook Pro, soldering, and crossing your fingers you did it right, we HIGHLY recommend this professional and efficient eBay service offering MacBook Pro 2011 repair which will replace the faulty GPU with a 2nd generation AMD GPU – making your MacBook Pro 2011 last forever!

Mac os for 2011 macbook pro

The eBay listing - here. Most repairs and replacements are under $200 and include shipping!

In summary, these are your BEST options for reviving your MacBook Pro 2011. Other guides online state you can permanently disable power to the faulty GPU, but none we followed worked. Keep in mind that even if you kill the power to the faulty GPU, it also disables your external display port, since the AMD GPU is wired to that. Your video performance for graphics and gaming will also suffer. The INTEL graphic chip is not a performance chip, whatsoever.

The 17” MacBook Pro Late 2011 is one of the fastest MacBook Pro’s Apple released (see the fastest MacBook pro 17” here) and is the last 17” model manufactured. These machine are still highly sought after online. The GPU repair on eBay is well worth the money down the road to preserve this vintage machine.

Highest Macos For Late 2011 Macbook Pro