Check Point Gaia OS can be deployed (ISO image) over Hyper-V infrastructure in Windows Server: Note: Refer to Check Point Hardware Compatibility List - go to tab 'Virtual Machines'. Hyper-V provides software infrastructure and basic management tools to create and manage a virtualized server computing environment. On the Installation Options page, select Install an operating system from a bootable CD/DVD-ROM and select the ISO you downloaded from Android-x86. You can now click Next, check out the summary and click Finish to create your new virtual machine. In Hyper-V Manager, click on your new Android virtual machine and click Connect in the lower right.
-->Create a virtual machine and install its operating system.
We've been building new tools for creating virtual machines so the instructions have changed significantly over the past three releases.
Pick your operating system for the right set of instructions:
Let's get started.
Windows 10 Fall Creators Update (Windows 10 version 1709)
In Fall Creators Update, Quick Create expanded to include a virtual machine gallery that can be launched independently from Hyper-V Manager.
To create a new virtual machine in Fall Creators Update:
Open Hyper-V Quick Create from the start menu.
Select an operating system or choose your own by using a local installation source.
- If you want to use your own image to create the virtual machine, select Local Installation Source.
- Select Change Installation Source.
- Pick the .iso or .vhdx that you want to turn into a new virtual machine.
- If the image is a Linux image, deselect the Secure Boot option.
Select 'Create Virtual Machine'
That's it! Quick Create will take care of the rest.
Windows 10 Creators Update (Windows 10 version 1703)
Open Hyper-V Manager from the start menu.
In Hyper-V Manager, Find Quick Create in the right hand Actions menu.
Customize your virtual machine.
- (optional) Give the virtual machine a name.
- Select the installation media for the virtual machine. You can install from a .iso or .vhdx file.If you are installing Windows in the virtual machine, you can enable Windows Secure Boot. Otherwise leave it unselected.
- Set up network.If you have an existing virtual switch, you can select in the network dropdown. If you have no existing switch, you will see a button to set up an automatic network, which will automatically configure a virtual network.
Click Connect to start your virtual machine. Don't worry about editing the settings, you can go back and change them any time.
You may be prompted to ‘Press any key to boot from CD or DVD’. Go ahead and do so. As far as it knows, you're installing from a CD.
Congratulations, you have a new virtual machine. Now you're ready to install the operating system.
Your virtual machine should look something like this:
Note: Unless you're running a volume-licensed version of Windows, you need a separate license for Windows running inside a virtual machine. The virtual machine's operating system is independent of the host operating system.
Before Windows 10 Creators Update (Windows 10 version 1607 and earlier)
If you aren't running Windows 10 Creators Update or later, follow these instructions using New Virtual Machine Wizard instead:
Everyone knows how S-L-O-W and painful the Android emulator can be when developing. The Intel x86 system images are better, but still a bit slow, so most of us test and debug on actual devices. Still, emulators come in handy. In the past, I came across the Android x86 project and thought it would be a good option, but found the project to not be ready for prime time. With their 4.4 release earlier this month, that has changed.
It still isn't straight forward to install, so I am going to document the steps and some of the problems I ran into.
Installation
First, download the ISO for the 4.4 or newer release Android x86 from the downloads page.
Next fire up Hyper-V Manager. I assume you have some experience creating virtual machines using Hyper-V, so I am just going to outline the setup. If you need more info, Google it or check out this quick-start.
First, we need to make sure that a Virtual Switch is setup to enable networking. If you haven't already done it for another virtual machine, click Virtual Switch Manager on the right and create a new External Virtual Switch. Name it something like Ethernet and make sure it is linked to your Ethernet card, not your WiFi.
Back in Hyper-V Manager, at the top right, click New, Virtual Machine and name it Android 4.4.
Specify Generation 1 on the next screen, then select the startup memory. You probably want to increase it to 1024 or 2048 MB. Also, select Use Dynamic Memory.
In Configure Networking, select the Ethernet switch we setup previously.
On the Connect Virtual Hard Disk page, you can use the defaults, but you will want to decrease the size of the disk to something like 16 GB.
On the Installation Options page, select Install an operating system from a bootable CD/DVD-ROM and select the ISO you downloaded from Android-x86.
You can now click Next, check out the summary and click Finish to create your new virtual machine.
In Hyper-V Manager, click on your new Android virtual machine and click Connect in the lower right.
This will open the virtual machine in a powered off state. Press the Start button in the toolbar to power up and boot the machine. It will boot to the Live and Installation CD screen. Use the keyboard to scroll down and select Installation - Install Android-x86 to harddisk.
Select Create/Modify partitions,
Use the keyboard to highlight New and press Enter.
Select Primary, then accept the size of the partition, then click on Bootable.
Now, highlight Write, press Enter and type in yes to create the partition. You can now Quit.
You can now choose sda1 Linux Virtual Disk.
Format as ext3. confirm your selection, then wait while the partition is created. It will sit at 0% for awhile, don't worry, it will go.
Next you will be asked if you want to install GRUB. Say yes.
Also say yes to making /system read-write.
It will now install Android on your virtual disk.
After a successful installation, you will be asked if you want to run Android or reboot. Don't do either, click on the Turn Off button to shutdown the machine, then go to Media | DVD Drive and Eject the Android X86 ISO. Now press Start to boot the machine.
You will see the GRUB boot screen, then it will start booting Android and go to the initial setup. Step through as you would any Android device with a few small points.
On the Just a sec progress screen, click the screen with the mouse a couple of times so that it doesn't time out and lock the device.
Skip Wi-Fi setup. Your Ethernet card will act like cell data.
If you have a Google account and want to use it, click Yes, otherwise No.
Once you are done the setup, immediately go to Settings | Display | Sleep and set it to never. When Android x86 locks the screen, you cannot get it to wake up in Hyper-V. If anyone figures out how to do it, please post the solution in the comments.
Os X Iso For Hyper V Windows 10
Debugging in Android Studio
Now for the fun stuff.
Setup the Emulator for Debugging
First, we need to enable debugging on the device. Go to Settings | About tablet and click on the Build number 7 times to enable the Developer Options.
Go back to settings and open Developer Options and turn on USB debugging. I also find it useful to enable Show Touches in the Input section so that you can see the mouse clicks.
Next, go back to settings and into Security and enable Unknown Sources.
Connect ADB
In Android, run the Terminal Emulator. The font is probably way too small to see, so go into Preferences and increase the font size.
Back in the emulator window, type netcfg and take note of the IP address of eth0.
Now, back on Windows open a command prompt (with a path to your Android tools) and type adb connect [ipaddress] with the IP address from the device. Now when you do an adb devices, you should see your emulator listed.
Debug Your App from Android Studio
Launch Android Studio and load your project. In the configuration dropdown in the toolbar, select Edit Configurations. In the dialog, click on your app configuration and in the Target Device section, make sure it says Show chooser dialog. Close the configuration dialog.
You can now Run or Debug your app and a Choose Device dialog will come up with your emulator listed.
So far, I haven't been able to adjust the emulator resolution to portrait mode and you can't rotate the device. From what I can tell, Hyper-V limits the available resolutions to common desktop resolutions. There is also no sound in the emulator and I haven't been able to get it working with my WiFi card yet, but it is a great option for quick debugging and testing.
Os X Iso For Hyperv
That's all there is to it. If you have any solutions, questions or problems, post them in the comments.